Vim

Introduction

The screen-oriented text editor vim stems from vi, written in '76 for an early BSD Unix release by Bill Joy. vi is old, nonintuitive, and complex. vim stems from 1991, and stands for Vi IMproved, but its improvements do not lessen it's nonintuitivity or complexity.

So why do we feel that vim is an essential system tool? Well, it's because

• vi can be found on just about any Linux and Unix system
• vi is very powerful
• with some practice, it's even usable.

Installation and configuration

To get vim, simply use sudo apt-get install vim or sudo aptitude, and find vim in the available packages. Nice to know: when you install vim, you also get xxd, a tool to make a hexdump, or convert a hex dump back to it's original binary form.

In Debian Etch, the default editor is nano instead of vim. This can be changed in the following way:

which vim.basic 
sudo update-alternatives --set editor /usr/bin/vim.basic

(The first line is to check that you really have vim.basic in place) Now all commands that invoke an editor will use vim instead of nano. Is that a good thing? We're not sure, but we do want to keep our vi skills up to par, so we do this.

Using vim

Vim operates in two modes: a command mode and an insert mode. You start in command mode, so almost every key is a command. Several commands you can issue will bring you into --INSERT-- moode, e.g. i or a; to return in command mode press <esc> or ( <ctrl> [ ).

It can be confusing to remember if you're in command mode or insert mode (even though there's a bright marker in the left bottom of the vim screen :-). So remember: when you're in insert mode, <esc> will bring you to command mode; when you're already in command mode, <esc> does nothing (no harm done). So press <esc> two or three times, and you're sure to be in command mode.

Another thing to remember: if you're in command mode and you start entering a number before a command, the command will get repeated that many times. The most used feature of this is deleting lines. Deleting the current line is done with the command dd; deleting (for example) twelve lines can be accomplished using 12dd. Another example is the use of a number in front of G: command 12G (use <shift>-g) will bring you to the beginning of the 12th line. A special number is zero; pressing 0 as the first character in a command means immediately going to the beginning of the line.

Exiting vim

Command	Output
:w	Save
:w filename	Save with this filename
:q	quit vim
:q!	quit without save
:wq	save and quit

Cursor positioning

Key(s)	Movement
h	one character back
j	down one line, same column
k	up one line, same column
l,<space>	one character forward
b	one word back (to beginning of previous word)
e	one word back (to end of previous word)
w	one word forward
<enter>	beginning of next line
0 (zero)	beginning of line
$	end of line
nG	to beginning of line n; if no number given, the last line of the file
:n	also to beginning of line n (but this is visible as command)

Note that h,j,k,l is one block on your (US) keyboard

Searching

Key(s)	Search
/pattern	Moves the cursor to the next occurrence of pattern; will wrap around to the beginning of the file from the last occurence
?pattern	Moves the cursor backward to the previous occurrence of pattern; will wrap around to the end of the file from the first occurence
n	repeats last pattern search (either forward or backward)

Text insertion

Key(s)	Effect
a	appends text after cursor & switches to Insert mode
A	appends text at the end of the line & switches to Insert mode
i	inserts text before cursor & switches to Insert mode
I	inserts text at the beginning of the line & switches to Insert mode
o	opens new line below the current line for text insertion & switches to Insert mode
O	opens new line above the current line for text insertion & switches to Insert mode
<del>	overwrites last character during text insertion
<esc>	stops text insertion. The escape key on the DECstations is the <F11> key

Text deletion

Key(s)	Effect
x	deletes character under the cursor
dd	deletes current line
dw	deletes word under the cursor
d)	deletes to the end of the current sentence (up to and including the dot)
D	deletes to the end of the current line
d$	same (deletes to the end of the current line)
p	"paste", puts the buffer (e.g. text from the previous deletion) after the position of the cursor
P	"Paste", puts the buffer (e.g. text from the previous deletion) before the position of the cursor