|
|
| (One intermediate revision by the same user not shown) |
| Line 1: |
Line 1: |
| == '''LM sensors''' ==
| | * [[LM Sensors]] |
| | | * [[Smart Daemon]] |
| | |
| turn on i2c support in your kernel
| |
| | |
| -device drivers\i2c support
| |
| -device drivers\hardware monitoring\ ite87 -Asus asb100 - amd athlon temp
| |
| | |
| install the package lm-sensors
| |
| | |
| Apt-get install lm-sensors
| |
| | |
| ># sensors-detect -> wil give you a view of the found sensors (say YES to all questions)
| |
| | |
| Driver `eeprom' (should be inserted):
| |
| Detects correctly:
| |
| * Bus `SMBus PIIX4 adapter at 0b00'
| |
| Busdriver `i2c-piix4', I2C address 0x50
| |
| Chip `eeprom' (confidence: 6)
| |
| * Bus `SMBus PIIX4 adapter at 0b00'
| |
| Busdriver `i2c-piix4', I2C address 0x51
| |
| Chip `eeprom' (confidence: 6)
| |
| EEPROMs are *NOT* sensors! They are data storage chips commonly
| |
| found on memory modules (SPD), in monitors (EDID), or in some
| |
| laptops, for example.
| |
| Driver `k8temp' (should be inserted):
| |
| Detects correctly:
| |
| * ISA bus, undetermined address (Busdriver `i2c-isa')
| |
| Chip `AMD K8 thermal sensors' (confidence: 9)
| |
| Driver `it87' (should be inserted):
| |
| Detects correctly:
| |
| * ISA bus address 0x0228 (Busdriver `i2c-isa')
| |
| Chip `ITE IT8716F Super IO Sensors' (confidence: 9)
| |
| | |
| The script will give you the appropiate line to insert in /etc/modules
| |
| Make shure that the modules are configured in your kernel
| |
| | |
| | |
| #----cut here----
| |
| # I2C adapter drivers
| |
| i2c-piix4
| |
| # Chip drivers
| |
| # Warning: the required module eeprom is not currently installed
| |
| # on your system. For status of 2.6 kernel ports check
| |
| # http://www.lm-sensors.org/wiki/Devices. If driver is built
| |
| # into the kernel, or unavailable, comment out the following line.
| |
| eeprom
| |
| # Warning: the required module k8temp is not currently installed
| |
| # on your system. For status of 2.6 kernel ports check
| |
| # http://www.lm-sensors.org/wiki/Devices. If driver is built
| |
| # into the kernel, or unavailable, comment out the following line.
| |
| k8temp
| |
| # Warning: the required module it87 is not currently installed
| |
| # on your system. For status of 2.6 kernel ports check
| |
| # http://www.lm-sensors.org/wiki/Devices. If driver is built
| |
| # into the kernel, or unavailable, comment out the following line.
| |
| it87
| |
| #----cut here----
| |
| | |
| | |
| ># sensors will give you the readout of the sensors
| |
| | |
| it8716-isa-0228
| |
| Adapter: ISA adapter
| |
| VCore: +1.01 V (min = +0.00 V, max = +4.08 V)
| |
| VDDR: +3.38 V (min = +3.57 V, max = +4.08 V) ALARM
| |
| +3.3V: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
| |
| +5V: +4.89 V (min = +0.00 V, max = +6.80 V)
| |
| +12V: +11.97 V (min = +0.00 V, max = +16.32 V)
| |
| in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
| |
| in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
| |
| 5VSB: +4.89 V (min = +0.00 V, max = +6.85 V)
| |
| VBat: +3.22 V
| |
| fan1: 1588 RPM (min = 3245 RPM)
| |
| fan2: 0 RPM (min = 3245 RPM)
| |
| temp1: +27°C (low = -1°C, high = +127°C) sensor = diode
| |
| temp2: +32°C (low = -17°C, high = +127°C) sensor = thermistor
| |
| temp3: +25°C (low = -1°C, high = +127°C) sensor = thermistor
| |
| vid: +1.550 V
| |
| k8temp-pci-00c3
| |
| Adapter: PCI adapter
| |
| Core0 Temp: +7°C
| |
| Core0 Temp: -1°C
| |
| Core1 Temp: +8°C
| |
| Core1 Temp: +9°C
| |
| | |
| The read out of the CPU temp is still an issue. As you can see it gives the wrong values
| |